Not to be used with an impact wrench. This tool will be a huge asset to your shop. It is designed by the High Lifter team to help you properly remove or tighten the snorkel tube when replacing or upgrading the shaft or gear. Without this tool, it is very difficult to loosen the snorkel tube nut. There is currently no tool in a standard tool box that removes the nut easily. We stand behind the quality of our tool. If for any reason, pins are damaged, we'll replace the tool, no questions asked. It can also be used to check the output/snorkel gear in Polaris transmissions. If you service units and want to save time, this tool is a must!
If you are a mechanic, work at a dealership or are capable of rebuilding a transmission, this tool is for you! It is very difficult to loosen the snorkel tube nut, particularly when the nut is stuck or sticking due to debris or metal shavings from the transmission - this tool solves that problem.
There is currently no tool in a standard toolbox that removes the nut easily. This tool is designed by High Lifter to help you properly remove or tighten the snorkel gear tube when replacing or upgrading the front output/snorkel shaft and output/snorkel gear in the main gear case. It can also be used to check the backlash on the output/snorkel gear in Polaris transmissions.
Snorkel Gear Transmission Tool Features:
- Hardened 5140 alloy steel components with zinc finish.
- Tool body accepts a 40mm wrench or socket as well as a 1/2in square drive to aid in installation and removal.
- 3 heads to adapt the tool for different applications. Two heads machined and one with replaceable extended tip set screws.
- 2 thread cleaning taps to remove chips and burs from transmission case.
- Components secured with 8mm grade 12.9 bolts.
- Pins to aid in tool assembly.
- Installation tools and hardware included with replacement pins and bolts.
- Main tool has precision pins align the pin slots in the snorkel gear nut
- Constructed of plain carbon steel, with 5 dowel pins for easy insertion
- Smooth chrome finish for easy cleaning
- Additional interchangeable caps that allow the tool to work on multiple transmissions
- Caps have alignment pins and magnets to lock and secure them to the main tool. Makes for easy change out!
- Tool Mates to OEM Part # 3234278, 3236120, 3235947 & 3236423
- Can be used with a 1/2 square drive ratchet for easy removal or insertion of the snorkel tube
Note:
- This tool replaces part # HL-TOOL-P-ST and HL-TOOL-P-ST-2.
- This item is non-refundable.
- This tool is NOT intended or recommended to be used with an impact wrench.
