Polaris RZR 900/1000 Belt Removal/Installation Tool for Square Roller BOSS Clutches by Aftermarket Assassins

Every RZR owner should have one of these! This belt removal tool is simple, yet so effective. It hooks right into the roller opening on your clutch, then the bolt pushes the two halves apart. This allows for easy belt removal without pulling either clutch. Not only does it allow for easy belt removal, but it also makes installing a new belt extremely simple. This fits nicely with your stock tool kit, and uses the factory spark plug wrench. If you happen to blow a belt on the trail, chances are you have belt debris stuck in your clutch, and that can be extremely hard to remove. Since this tool holds the secondary open, it makes cleaning out belt debris much easier. Installing or adjusting primary weights without pulling your clutch can also be a pain since you have to remove the belt. Being able to remove the belt with this tool also makes adjustments much easier in the machine.

• Easily remove and install a new belt
• If you do blow a belt, this makes it much easier to clean out debris
• Bolt uses the same size socket as your spark plug wrench
• Designed to last with a double layer zinc coating
• Works on clutches converted to the round rollers

****Note

• **Does NOT fit 2024+ XP1000 Models**
• Third image is a similar tool on a 2015 XP 1000 (different clutch) just to show how the tool works.