Polaris RZR XP 1000 / XP Turbo / 900 S Upper Door Enclosure by SideXSide Enclosures
If your two-seat RZR already has a hard roof, windshield, and rear window, this Polaris RZR XP 1000 upper door enclosure is the piece that finally seals the cab. The upper door panels wrap your roll cage and lay across the top of your factory doors, filling the open gap where every bit of cold air and road spray comes in. Fitment on these two-seat machines is model-specific, so check the list below against your exact year and trim before ordering. Choose how you want it to attach in the drop-down, and plan on under an hour for the one-time setup.
Key Features
- Upper door panels sized for two-seat RZR models
- Cut from heavy-duty ballistic fabric, the same material used across the SideXSide line
- Works with your factory hard roof, windshield, and rear window already on the machine
- Zip-down windows let each door swing wide without unsnapping anything
- Wraps the roll cage and runs across the top of the stock door for a tight seal
- Three ways to attach: self-adhesive Velcro, self-adhesive snaps, or screw-in snaps
- Velcro sewn along nearly the whole panel so you place the anchor points yourself
- Ships complete with the hardware for installation plus a storage bag
- Sewn in Eastern Ohio and covered by a 1-year quality and workmanship warranty
Fitment
- Polaris RZR 900: 2015–2020
- Polaris RZR 900 S / Trail / XC: 2015–2020
- Polaris RZR S 1000: 2016–2020
- Polaris RZR XP 1000: 2014–2023
- Polaris RZR XP Turbo: 2016–2021
Important Fitment Notes
- Two-seat models only. Four-seat RZRs use a different enclosure.
- Your factory hard roof, windshield, and rear window need to be installed — this kit covers the upper doors, not the whole cab.
- Mirror customization is no longer offered. Enclosures are cut to the standard pattern.
- No guarantee of fit around aftermarket accessories such as mirrors, light bars, or speakers.
- No guarantee is given on self-adhesive Velcro or self-adhesive snaps sticking to every surface. The screw-in snap option is the most positive attachment.
- Velcro and self-adhesive snaps can lift decals if applied over them. Dry-fit and mark your spots first.
- Use short pieces of Velcro instead of one long run — small sections grip harder and stay put.
- Trailering with the enclosure installed is not recommended and voids the warranty.
Specifications
- Material: heavy-duty ballistic fabric
- Coverage: upper doors only, both sides
- Attachment method: wraps the roll cage and crosses the top of the factory door
- Attachment options: self-adhesive Velcro (no drilling), self-adhesive snaps (no drilling), or screw-in snaps (drilling required)
- Windows: unzip from the bottom
- One-time setup: under 1 hour
- Take off or put back on after setup: about a minute
- Included: all installation hardware and a storage bag
- MPN: RZR-XPTurboUpperDoors
- Warranty: 1 year on quality and workmanship
Real Life Value and Uses
- Block the crosswind that hits you square in the shoulder on an open two-seater.
- Keep rain off your lap on the ride back to the truck when the forecast misses.
- Stop the dust and mud coming off the tires from coating you and the passenger seat.
- Zip a window down for airflow on a warm afternoon instead of pulling the panel off.
- Head out early for deer season or a fence check without waiting for the sun to warm things up.
- Strip the panels off in about a minute when summer hits, then put them back on that first cold morning.
- Fold the set into the included bag so it is not taking up a hook in the shop all year.
Why Choose SideXSide Enclosures
- Over 30 years of canvas work behind every seam, with UTV enclosures built since 2008
- Designed and sewn in Eastern Ohio, not sourced overseas
- Thousands sold and shipped to riders around the world
- Pick up the phone and you will usually reach the owner who designed it
- 1-year warranty on quality and workmanship, repaired or replaced at our discretion
Match your year and model to the fitment list, pick your attachment style, and get your two-seat RZR sealed up — give us a call if you want us to double-check your machine before you order.
