Polaris RZR Turbo S 2018-2022 Upper Door Enclosure by SideXSide Enclosures
The Polaris RZR Turbo S upper door enclosure by SideXSide Enclosures is cut on its own pattern for the wide-body Turbo S, fitting 2018 through 2022 two-seat machines. The standard RZR XP Turbo enclosure does not fit this body. It closes the open upper half of both doors and works with the hard roof, windshield, and rear window already on your RZR. Heavy-duty ballistic fabric wraps your roll cage and runs across the top of the factory door, and each window unzips from the bottom so the door still swings all the way open. Choose your attachment method in the drop-down before you order.
Key Features
- Pattern made specifically for the 2018–2022 Turbo S body — not a modified XP Turbo panel
- Heavy-duty ballistic fabric built to take dust, sun, and hard miles
- Pairs with your existing hard roof, windshield, and rear window
- Windows unzip from the bottom, so doors open fully with the panels attached
- Attaches by wrapping the roll cage and crossing the top of the stock door
- Three attachment styles: self-adhesive Velcro, self-adhesive snaps, or screw-in snaps
- Velcro sewn along nearly the full panel so you choose the anchor points
- Everything needed for installation is in the box, along with a storage bag
- Designed and sewn in Eastern Ohio, backed by a 1-year quality and workmanship warranty
Fitment
- Polaris RZR Turbo S: 2018–2022, two-seat models
- Turbo S only. This is a dedicated pattern and will not interchange with the standard RZR XP Turbo or XP 1000 enclosure.
- Four-seat Turbo S models use a different enclosure.
Important Fitment Notes
- Your factory hard roof, windshield, and rear window must be on the machine. This kit covers the upper doors only.
- Mirror customization is no longer offered. Panels are cut to the standard Turbo S pattern.
- No guarantee of adaptation around aftermarket accessories such as mirrors, light bars, or speakers.
- No guarantee is given on self-adhesive Velcro or self-adhesive snaps bonding to every surface. Screw-in snaps give the most positive hold.
- Velcro and self-adhesive snaps can pull decals if applied over them. Lay the panel out and mark your spots before peeling any backing.
- Use short pieces of Velcro instead of one long strip — smaller sections bond better and last longer.
- Trailering with the enclosure installed is not recommended and will void the warranty.
Specifications
- Material: heavy-duty ballistic fabric
- Coverage: upper doors only, driver and passenger side
- Vehicle fit: 2018–2022 Polaris RZR Turbo S, two-seat
- Attachment: wraps the roll cage and crosses the top of the factory door
- Attachment options: self-adhesive Velcro (no drilling), self-adhesive snaps (no drilling), or screw-in snaps (drilling required)
- Window operation: unzips from the bottom
- Initial setup time: under 1 hour
- Remove or reinstall after setup: about one minute
- Included: all installation hardware and a storage bag
- MPN: RZRTurboSUpperDoors-XX
- Warranty: 1 year on quality and workmanship
Real Life Value and Uses
- Knock down the wind blast that comes with Turbo S speed on open ground.
- Cut the dust cloud pouring into the cab when you are running second or third in the group.
- Ride into the cold months without giving up the machine until spring.
- Zip the window down for airflow when the day warms up, then zip it back when the sun drops.
- Keep grit off your seats and dash on desert and gravel runs.
- Pop both panels off in about a minute for a summer weekend, then put them back on the next cold morning.
- Pack the whole set into the included bag instead of leaving it piled in the shop.
Why Choose SideXSide Enclosures
- More than 30 years of canvas experience, building UTV enclosures since 2008
- Every panel is designed and sewn in Eastern Ohio
- Thousands of enclosures shipped to riders worldwide
- Call us and you will usually get the owner who designed the pattern
- Covered by a 1-year warranty on quality and workmanship, repaired or replaced at our discretion
If you are running a 2018 through 2022 two-seat Turbo S, pick your attachment style and get those doors closed in before the next cold ride — call us if you want a second set of eyes on your machine first.
