Polaris RZR RS1 2" Signature Series Lift Kit by High Lifter

First and foremost, using the Polaris RZR RS1 2” Signature Series Lift Kit by High Lifter, ensures that you have the capacity to increase your ground clearance. In addition to this, drivers are also enabled to enlarge the space, making larger tires to fit in and ride on any terrain without encountering any problems. It should be known that the Polaris RZR RS1 2” Signature Series Lift Kit by High Lifteris a product which has been perfected over the years; close to 29 years of trial and error which has been employed by the staff of High Lifter industry. Another benefit of using this Polaris RZR RS1 2” Signature Series Lift Kit by High Lifteris, it is very easy to install, as there is no need for a prior technical knowledge. All you need do is, stick with the guide, and you are good to go. After its installation, it is also very easy to use, and you would certainly not regret adding this UTV lift kit to your UTV. Also, each part of the lift kit comes with powder coated, which implies that it would last longer than usual.

2 Signature Series Lift Kit Features:

• Zinc plating or powder coat finishes for long life in rugged conditions
• All installation hardware included
• Detailed step by step photo instructions
• Signature Series include High Lifter logo precision laser cut
• Backed by High Lifter Lifetime Warranty

Note:  If you are running factory wheels, this kit will require 1 spacers on the front or the tires will rub the shock springs.

Note:  You will need to do minor trimming of plastic inside of the rear fender/panel cover. It is not seen from the exterior of the unit. Plastic trimming is required to gain clearance for the rear shocks when lift is installed.