SKU:
AX01-004F0-PR-EPZ
BRAND:
SuperATV
SuperATV Heavy Duty Rhino 2.0 FRONT Axle Pair for Polaris RZR – 4340 Chromoly, 2x Stock Strength
Take the front end of your ride to the next level with the SuperATV Rhino 2.0 Front Axle Pair for Polaris RZR – a heavy-duty front axle set engineered to handle the abuse that routinely snaps stock units. Forged from heat-treated 4340 chromoly steel with a 4mm larger shaft diameter, these Polaris RZR front axles deliver up to twice the strength of OEM, with maximized CV joints built to survive the extreme angles that come with lift kits, big tires, and aggressive driving.
A Bigger, Stronger Axle
Your Polaris RZR XP 1000 is one mean machine – but can the factory front axles really hold up to the kind of beating you put them through? If you've sent your RZR through the ringer a time or two, odds are you've already had a stock axle let you down. That's exactly why SuperATV built the Heavy-Duty Rhino 2.0 Axles. Whether you're replacing a busted-up set or getting ahead of the problem before it leaves you stranded, Rhino 2.0s let you ride hard without sitting in the back of your head worrying about what's going to snap next.
The Rhino 2.0 Formula – Better Materials, Better Design
When the SuperATV engineering team started working on the Rhino 2.0, they didn't just tweak a few small things and slap a new sticker on the box. Every inch of the axle got reworked from the ground up. Larger axle shafts paired with all-chromoly steel construction deliver up to twice the strength of stock. The maximized CV joints handle steep articulation angles and stay cooler under load, no matter how hard you're driving. The result is a true heavy-duty UTV axle built for the worst conditions you can throw at it – all thanks to the Rhino 2.0 formula:
- A massive 4mm increase in shaft size
- End-to-end chromoly construction
- Proprietary heat treatment
Why Rhino 2.0? Experience the Rhino Revolution
SuperATV brings over 10 years of axle and suspension know-how to the Rhino 2.0 – the next generation of their flagship axle line. What can up to 100% stronger do for you? It gives you the confidence to tackle the roughest terrain without that nagging worry in the back of your head every time you hit the throttle. Rhino 2.0 stands out in the heavy-duty axle segment thanks to its combination of maximized CV joints, larger shaft diameter, and SuperATV's proprietary mix of materials and heat treatment. Each axle is precision-engineered with state-of-the-art CAD technology and tested against real-world scenarios – 80+ mph desert racing, monster-tire mud runs on lifted machines, and full-tilt rock crawling. The result is an axle that requires no break-in period and won't fail from heat buildup or metallurgical issues.
Designed, Built, and Tested in Madison, Indiana
SuperATV axles are designed, manufactured, and tested right at SuperATV's facilities in Madison, Indiana – so when you bolt on a set of Rhino 2.0s, you're buying straight from the source. And it's a source worth trusting. SuperATV has invested millions into top-tier CAD technology and runs Rhino 2.0s through extensive lab and real-world field testing before any set ever ships. That's how they're able to deliver one of the toughest heavy-duty Polaris RZR XP 1000 front axles on the market.
Backed by an 18-Month Warranty
You can't sell an axle this serious without a warranty to match. SuperATV blows past the industry norm with an 18-month warranty, so you can actually put these things to work without second-guessing it. Odds are you won't be able to break them – but if you do, SuperATV has you (and your Rhino 2.0s) covered.
Key Features
- Up to 2x stronger than stock
- Made with 4340 chromoly steel, end-to-end
- Proprietary heat treatment for superior strength and longevity
- Maximized CV joints – operates at high CV angles (40°+) without binding
- A massive 4mm increase in shaft diameter over OEM
- Synthetic grease included to keep CVs running cooler
- Field and lab tested for extreme strength and endurance
- Direct OEM replacement – bolts in without modification
- Sold as a front pair (left and right)
- Industry-leading 18-month warranty
Fitment Notes – READ CAREFULLY
This listing covers two different front axle part numbers – make sure you select the correct one for your machine.
AX01-005F0 Pair (Front):
- Polaris RZR XP 1000: 2014–2023
- Polaris RZR XP 4 1000: 2014–2023
- Polaris RZR XP 1000 High Lifter Edition: 2017–2023
- Polaris RZR XP 1000 Trails & Rocks Edition: 2017–2023
- Polaris RZR XP Turbo / XP 4 Turbo: 2016–2021
AX01-004F0 Pair (Front):
- Polaris RZR XP 1000: 2014–2023
- Polaris RZR XP 1000 High Lifter Edition: 2016 Only
Important Compatibility Warnings
- Will NOT fit Polaris RZR Turbo S (2018+)
- NOT compatible with Anti-Lock Brake Systems (ABS)
- May require minor grinding for proper fitment on RZR XP Turbo models – review SuperATV's installation instructions before starting
âš Fitment Data Flags:
1. Source data shows conflicting High Lifter Edition year ranges. SuperATV's manufacturer copy lists "2015–2023" for the overall Rhino 2.0 lineup, while the AX01-005F0 listing data shows "2015–2016" for the High Lifter. We've reconciled this against the broader SuperATV-listed range and current Polaris production records – verify against your specific machine before ordering.
2. The RZR XP/XP 4 Turbo platform ended production in 2021 (replaced by the Pro XP), so the correct cutoff is 2016–2021, not "2016+".
OEM Part Numbers Replaced
- Front (AX01-005F0): 1333434, 1334492
- Front (AX01-004F0): 1333123, 1333283, 1333420, 1333943, 1334308
*Note: This listing is for the FRONT pair. Rear part number (AX01-002R0) is sold separately.*
Specifications
| Spec | Detail |
|-----------------------------|-----------------------|
| Brand | SuperATV |
| Part Numbers | AX01-005F0-PR / AX01-004F0-PR |
| Position | Front (Pair – Left & Right) |
| Material | 4340 Chromoly Steel |
| Shaft Diameter Increase | +4mm over OEM |
| Strength vs. Stock | Up to 2x (up to 100% stronger) |
| Treatment | Proprietary Heat Treatment |
| CV Angle Capability | 40°+ |
| Grease | Synthetic (included) |
| Item Weight | 32 lbs |
| Dimensions | 32 x 5 x 5 in |
| Designed & Built | Madison, Indiana, USA |
| Warranty | 18 Months |
Real Life Value and Uses
- Rock crawling and technical trails – handles aggressive throttle stabs and traction loads without snapping
- Desert racing and high-speed runs – engineered and tested for 80+ mph performance
- Dune and sand riding – keeps power flowing to the front wheels when you're climbing or accelerating hard
- Mud bogging and High Lifter setups – built tough enough for larger tires and added drivetrain stress
- Lifted and DYNAMIX-equipped RZRs – designed for the extreme front-end CV angles that destroy stock axles
- Aggressive trail and woods riding – survives the abuse that breaks weaker OEM axles
- Tuned and turbo'd RZRs – supports the extra torque from clutch kits, ECU tunes, and engine mods
- Daily-driven UTVs – a confidence-boosting upgrade for riders tired of getting stranded with a broken front axle
Why Choose SuperATV
- American-made – designed, manufactured, and tested in Madison, Indiana
- Over 10 years of axle and suspension engineering experience
- Industry leader in UTV/SxS aftermarket drivetrain components
- Millions invested in top-of-the-line CAD technology for axle testing
- Every Rhino 2.0 axle is rigorously field and lab tested before release
- Proven track record with thousands of riders running them on the toughest terrain
- 4340 chromoly is the gold standard for high-strength axle construction
- Heavy-duty CVs and synthetic grease mean less heat and longer life
- No break-in period required – bolt in and ride
- Trusted by SuperATV in their own lift kit packages – built for riders who don't lift just to cruise
- Industry-leading 18-month warranty backs every Rhino 2.0 axle with full manufacturer support
- Direct-fit, no-modification install on most models (minor grinding may apply on XP Turbo)
Frequently Asked Questions (FAQ)
- What makes Rhino 2.0 front axles better than stock RZR XP 1000 axles? Rhino 2.0 axles are built from end-to-end 4340 chromoly steel with noticeably larger CV components than OEM.
- Will Rhino 2.0 front axles fit my Polaris RZR XP 1000? Yes – Rhino 2.0 front axles are purpose-built for the Polaris RZR XP 1000 platform with model-year-specific fitment.
- Are Rhino 2.0 axles required when running a lift kit? On many DYNAMIX setups and high-angle suspension builds, yes – Rhino 2.0 axles are needed to keep things from over-binding and failing early.
- How much stronger are Rhino 2.0 axles compared to OEM? A lot stronger – up to 100% over stock.
- Can Rhino 2.0 front axles handle aggressive riding and big tires? Absolutely – made for oversized tires, lift kits, and the kind of mud and trail abuse that wrecks weaker axles.
- How does the CV joint design improve durability? The CVs use maximized spiders and cages, which spread torque more evenly across the joint and cut down on internal stress.
- Is installation difficult for Rhino 2.0 front axles? Not really – installation is on par with a standard OEM axle swap, using normal hand tools.
- Do Rhino 2.0 axles affect ride quality or handling? Nope – designed to deliver smooth power transfer and factory-like ride feel.
- Do Rhino 2.0 axles require a break-in period? No – ready to run hard right out of the box.
- What warranty does SuperATV offer on Rhino 2.0 axles? Every Rhino 2.0 axle is backed by an 18-month warranty.
- Why choose SuperATV Rhino 2.0 axles over other heavy-duty options? Rhino 2.0 axles are lab- and field-tested, designed specifically with high-angle use in mind and trusted in SuperATV's own lift kits.
âš Important Warning: This product can impact machine operation. The customer and/or user is responsible for ensuring compatibility with their machine as currently configured, proper installation, and understanding any impact this product may have on the machine's operation.
Stop replacing broken stock front axles after every ride – bolt in SuperATV's Rhino 2.0 Front Axle Pair and ride harder, longer, and with total peace of mind.
