Introducing the first-ever 100% Plug & Play UTV running and brake light. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights™ have raised the standard for UTV accent lighting.
Here’s an overview of what you get with the Red Apex Lights™:
- Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
- Custom Plug & Play wire harnesses for the Polaris RZR Pro R
- Multi-Mount Hardware: mount Apex Lights™ to any flat body panel, roll cage, roof or bumper
KEY SPECS
- 5x Brighter than Polaris OEM rear running and brake lights
- 54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
- Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
- Aluminum heat-sink frame
- Extreme lighting efficiency: 2 Amps per pair of Apex Lights™
PULSING BRAKE LIGHTS
When you brake, the Red Polaris RZR Pro R Apex Lights™ pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear you’re slowing down.
WATERPROOF & DUSTPROOF. EFFECTIVELY INDESTRUCTIBLE
The Polaris RZR Pro R Apex Lights™ are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.
PERFECTLY DIFFUSED LIGHT OUTPUT
The Polaris RZR Pro R Apex Lights™ are engineered to display perfect LED diffusion. That means Apex Lights™ throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”.
LIGHTING CUSTOMIZATION & MOUNTING OPTIONS
Apex Lights™ unlock a new level of UTV customization and safety. RAVEK’s Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:
- Exterior Body Panels (rear and/or side panels)
- Roll Cage
- Roof
- Bumpers
Each Apex Lights™ kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25” – 2.5” roll bar or bumper.
Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.
ADD LIGHTING HIGHER UP ON YOUR UTV
The original concept behind the Apex Lights™ was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines – they dramatically increase visibility and make our machines easy to pick out of a group.
EXTREME LIGHTING EFFECIENCY
With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights™ as you want to give your SxS a truly custom look.
If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.
Overview:
- Mount Anywhere: Roof, Panel, Bumper Cage
- Flashes when braking for greater visibility
- IP67 Waterproof & Impact-Ready
- Truly Plug & Play DIY Installation
- Unlimited Lifetime Warranty
Features:
- 500% Brighter Than OEM Taillights: Be prepared and visible in dusty or low-visibility conditions. The Apex Light™ runs 5x brighter than RZR Pro R stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8” rigid lenses.
- Customized To You With Next-Generation Diffused LEDs: Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. Fully Plug & Play installation for the RZR Pro R in under 30 minutes with no drilling required. Add up to four sets – eight lights total – on your roof, roll bar, rear bumper, or wherever else you can imagine. Custom diffusion panels deliver a clean, futuristic look.
- Rugged, Nearly Indestructible Formed Lights: IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.
Technical Specifications:
- Waterproof Rating: IP67
- Amperage: 0.25A - 1.1A
- Watts: 10.5 - 15.4
- Temperature Rating: -40° F - 140° F (The hottest temperature recorded on Earth is 134.1° F on July 10, 1913 in Death Valley.)
- Weight (oz.): 4.2
- Size: 7 7/8" L x 7/8" W
Raw Lumens
- White : 1,512
- Amber : 1,080
- Red : 378
Installation Options
- Plug & Play Harness
- Roll Bar Mount
- Adhesive Mount
- Drill or No-Drill
Installation:
- Est. Install Time: 20 - 40 minutes
