Augment and improve your Polaris RZR 900/1000 with the Half Windshield-GP by S-Powersports. Do you enjoy the wind in your hair but hate having a dirty dash? S-Powersports’ Half Windshield-GP is an optimized compromise, giving you the benefits of enclosure, while still allowing you to enjoy the great outdoors. With either tinted or non-tinted options, the scratch-resistant polycarbonate panel is much stronger than the average UTV windshield -- with hard coating applied on both sides to protect against the roughest of conditions.
The design of the windshield is fairly flexible, and can be tailored to meet specific needs (including both hard- and soft-top machines). Its toolless instal makes it a breeze to put on and take off, and the cushioned strip of rubber on the bottom protects your hood while making the seal between the two components air tight. At 7.5 high and 41 in length, the Polaris RZR 900/1000 Half Windshield-GP by Spike Powersports spans the entirety of your vehicle's front end, easily mounting on the bottom of the roll cage using twist-tightened flip clamps.
Half Windshield Features:
- Easy to install – comes with all necessary hardware and instructions
- Contoured to hood with full length rubber seal for a great fit
- Add an LED Light Kit to brighten your night riding!
- Constructed of .177 general purpose Polycarbonate
- Toolless install and removal with flip clamps
- Half windshield height: 7 1/2 (220mm)
- Can be used with soft or hard tops
- Rubber cushioned hood seal
- Trailerable
Spike Powersports Front Half Windshield 77-4250 Care Instructions:-
- Create a mixture of mild liquid dish soap and warm water (Recommended UTV windshield washing/cleaning solution)
- Or use Pre-made Polaris RZR windshield solution option: 13946
- Take your side by side windshield cleaning solution and wash the UTV window(s), interior, and exterior
- Only use a clean soft, micro-fiber cloth to wipe gently and do not scrub- apply very light pressure ***Do not use a paper towel and Windex***
- Rinse UTV windshields well and air dry
- Let dry for at 30 minutes to 2 hours depending on the humidity level of your location
- Get on that machine and have an awesome time now that you can see!!!
- Stay safe while riding out there and check out Everything Polaris Rzr for more UTV parts and accessories
Warning: DO NOT USE Loctite or any other thread sealer on the screws!
