When the time comes to load your rig and go, the last thing you want is a shot, faulty, or nonfunctional loading ramp. But even a broken-down and busted-up Polaris RZR loading ramp is better than no ramp at all. If you’ve got yourself a bale bed and a chain, you might be able to get by without a Polaris RZR trailer ramp. Or if you have access to a loading dock, you can at least load your Razor without needing a UTV ramp. For the everyday average Joe, however, a proper side-by-side ramp is nearly as important as the UTV itself. Sure, you can drive around your property and be just fine without a ramp, or if your bike is street legal, you can travel even further without needing a Polaris RZR ramp. But for those who don’t live in the boonies, those who like to rip it up at race tracks / ORV parks, and those who regularly attend UTV rallies in far-flung destinations across the US, having the ability to haul a Razor from place to place is essential. And regardless of whether you use an enclosed trailer, a gooseneck trailer, or an on-truck UTV deck, chances are your transportation method requires a ramp or two. So if you’ve got your sights set on either a truck bed ramp for your Polaris RZR or a trailer ramp for your Polaris RZR 4-door, we can sort you out with the perfect product to meet your every need at Everything Polaris RZR!
There are various types of ramps out there for the Polaris RZR, and not all ramps will work in every situation. Straight ramps that are relatively short in length may be adequate for someone with a low-sitting trailer, whereas a longer set of arched ramps could be required by individuals with taller trailers. Similarly, while some riders prefer one single loading ramp, others opt for dual runner loading ramps. Dual runner ramps can be used to load anything from UTVs and ATVs to motorcycles and riding lawn mowers. Many dual runner UTV ramps are made from aluminum, which makes their strength-to-weight ratio incredibly high. Furthermore, a lot of dual runner ramps are foldable, and because of this, users can easily carry them alongside the other items in their trailer or truck bed. Folding ramps are also convenient to store, as they don’t occupy much space and can fit in areas where non-folding ramps cannot.
Whether it’s a rigid Polaris RZR ramp or a set of folding Polaris RZR ramps, it is important to consider the load capacity of any ramp system before buying or using it. Someone with a 900 Lb Polaris ACE 570 EPS, for example, won’t require a ramp with the same load-bearing capacity as a Polaris RZR Pro XP 4 owner. Although the former can use a heavy-duty ramp if they feel so inclined, the latter will put themselves, their UTV, and their trailer / truck at risk by using a ramp that isn’t rated to handle the weight of their side-by-side. Aluminum loading ramps are great, but steel loading ramps can work equally well. And although steel ramps tend to be heavier, they are also stronger -- albeit not on a pound-per-pound basis.
Just like you want your Polaris RZR ramps to be strong enough to hold your vehicle, you also want your ramps to be long enough for the task at hand. The shorter your ramps are, the steeper the loading angle will be. So if you’re a bit uneasy when it comes to loading / unloading and want to play it safe, extra-long loading ramps might be in the cards for you. But even if you’re extremely confident with your loading abilities, if you go too short with your truck ramps or trailer ramps, you could scrape the undercarriage of your Razor or become high centered where the ramp meets the trailer. To avoid this, longer loading ramps as well as arched loading ramps can help. And to prevent the ramps from sliding off during use, manufacturers have added features like rubber tips and ground anchors for added sturdiness and stability!
Regardless of whether you go with an 8-foot Polaris RZR ramp, super long truck box ramps, or a set of small 48” Polaris RZR loading ramps, it’s crucial that your bike maintains traction throughout the entire loading process. And to achieve this, the ramps we sell are designed with traction-enhancing surfaces. The standard rung-style ramps can work, but alternative ramp surfaces like diamond plating, punch plating, and grid-style top planes also work. So if you need some Polaris RZR ramps with ample traction, made to the correct length, and designed with the proper load reading, the products at Everything Polaris RZR won’t let you down!
Shop: 2022 RZR UTV Ramps
Shop: 2021 RZR UTV Ramps
Shop: 2020 RZR UTV Ramps