Send us your question. We'll contact your shortly!
Sometimes you just need to get a little more out of your Polaris RZR. We get that! To help give you that extra drive you have been seeking, we are happy to offer you our lineup of UTV radius rods for the Polaris RZR. These UTV aftermarket accessories will have you considering tackling those “impossible” trails. It doesn't. matter if the bushings on your old stock radius rods wore out or you snapped an aftermarket ORB radius rod on a gnarly trail, if you need to swap out one or multiple radius rods in your Polaris RZR, you've come to the right site. In addition to providing you with the best stock or aftermarket radius rods for the Polaris RZR, we can also help you install them correctly. For example, many riders notice that their tires tilt in at the top after installing new radius rods.This is common for riders with RZRs that incorporate adjustable heims. If there is a him on both ends of the top, you can loosen the jam nut on both sides, jack that wheel off of the ground and turn the radius arm by hand to take away the negative camber. If your RZR only has a him on one end, you still may not have to take it all apart and start over. Just take the wheel off, turn the jam nut loose on the top one, take the bolt out of only the hub side, twist it out 1-2 turns (whatever would get it straight) and reinstall. No need to mess around with the bottom or frame side. Only a 10 minute job and you're good to go. Many RZRs come this way new, so even if you didn't do anything to the radius rods and want to straighten up your tires, these techniques will work for you as well. So get out there and keep ripping, because with our help here at Everything Polaris RZR, you'll never again be down for the count with a busted RZR radius rod!