XTC Power Products Leads the way in UTV Wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Polaris RZR XP 1000/Turbos with Strobe System. Unlike other switch systems available, the Power Control System's designed with the installer in mind. Every PCS has a vehicle specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
The PCS-72S includes1 x 30 ampand1x 20 amphigh current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. There are also3 x 10 ampdirect wire circuits provided for low power accessories like rock lights or whip lights. One Switch's a dedicatedStrobe Light System with 2-Channels on a 10 amp fuse. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. Most UTV charging systems produce anywhere from 40-70 amps. Because of this, a 50 amp circuit breaker at the battery safely supplies power to the PCS. Installing a 100+ amp high power switch system is not practical in a UTV.
Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth. Lastly, the purple and yellow wires are the Strobe System circuits and Strobe in a left/right sequence when activated. This feature can be integrated into the vehicle brake light system and other aftermarket accessories.
Designed for the Polaris RZR XP's, the PCS-72S has become our most universal Power Control System with Strobe System for switch mounting locations. The switch harness has three rocker switches that mount in the center dash, followed by a single switch mounted right of the steering wheel, and then two more go left of the steering wheel. Also, rocker switches can be installed together in any custom way deemed fit by the installer as well. The Strobe System has 7 different flashing patterns that can be cycled through using the included black mountable switch. Moreover, a Molex connector links the switch harness to the main Power Control System.
The PCS-72S has a modular power connector at the fuse box with +/- ring terminals that connect to ignition power. Consequently, the lower LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The upper light only comes on when the rocker switch's pressed.It should be noted that the wiring system will work with or without the vehicle's ignition power on.
|RZR Vehicle (2 Seater)||2022 RZR 900 2022 RZR XP 1000 2021 RZR 900 2021 RZR XP 1000 2021 RZR XP Turbo 2020 RZR 900 2020 RZR XP 1000 2020 RZR XP Turbo 2019 RZR 900 2019 RZR XP 1000 2019 RZR XP Turbo 2018 RZR 900 2018 RZR XP 1000 2018 RZR XP Turbo 2017 RZR 900 2017 RZR XP 1000 2017 RZR XP Turbo 2016 RZR 900 2016 RZR XP 1000 2016 RZR XP Turbo 2015 RZR 900 2015 RZR XP 1000 2014 RZR XP 1000|
|RZR 4 Vehicle (4 Seater)||No fitments|
|Polaris RZR RS1||No fitments|
|Polaris ACE Vehicle||No fitments|
|RZR 170 (Youth)||No fitments|
|Polaris ACE 150 (Youth)||No fitments|
Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complementary products, confirm vehicle fitment and more.