Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.
This puller can be used on almost any Polaris ATV or UTV with the a-arm style front suspension except the RZR 1000 and General 1000
Work with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666
|RZR Vehicle (2 Seater)||2018 RZR 570 2017 RZR 570 2016 RZR 570 2015 RZR 570 2014 RZR 570 2013 RZR 570 2012 RZR 570|
|RZR 4 Vehicle (4 Seater)||No fitments|
|Polaris RZR RS1||No fitments|
|Polaris ACE Vehicle||No fitments|
|RZR 170 (Youth)||No fitments|
|Polaris ACE 150 (Youth)||No fitments|
Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complementary products, confirm vehicle fitment and more.