Get rid of that slop in your front end by replacing your worn out ball joints with these OEM quality replacements. Fits either left or right side on the upper or lower a-arms. Includes the dust caps and a new circlip. Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the ball joint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
To install the new ball joints simply flip the a-arm over on the holding tool, put the new ball joint in place, use the install tool on top of the ball joint, and press into place. The install tool pushes against the edge of the ball joint so you do not dimple or damage the center. Very simple and no damage to paint or powder coat.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
|RZR Vehicle (2 Seater)||2017 RZR 570 2016 RZR 570 2015 RZR 570 2014 RZR 570 2013 RZR 570 2012 RZR 570|
|RZR 4 Vehicle (4 Seater)||No fitments|
|Polaris RZR RS1||No fitments|
|Polaris ACE Vehicle||No fitments|
|RZR 170 (Youth)||No fitments|
|Polaris ACE 150 (Youth)||No fitments|
Our Polaris Experts are standing by, ready to answer questions or go into more detail about the features and benefits of this product, help you to explore similar or complementary products, confirm vehicle fitment and more.